外部参照 - 加载启动
**** Hidden Message ***** 使用部分打开其中一个选项是不加载外部参照....
或者如果您的外部参照位于唯一的图层上 - 该图层无法打开... 另请参见xloadctl
和indexctl 最好的办法是考虑杰夫M的反应。其他选择在理论上可能听起来不错，但从长远来看实际上会有问题。
所有外部参照都存储在网络上吗？ 是的，所有的DWG外部参照都存储在我们的网络上。
我对partiaload很好奇。
我尝试打开一个文件，但是部分加载对话框没有出现。它只是像平常一样打开绘图。 我只是在看些书....
Solved! by AllenJessup. See the answer in context.
Kudo. .
Autodesk has confirmed that Partial Open does NOT work on any drawing that has AEC objects in it. It should work on a drawing that was created in Basic AutoCAD. But once that drawing is saved from Civil 3D it wont work.
A request has been sent to update future Civil 3D help files to make this clear.
Allen
..
Solved! by AllenJessup. See the answer in context.
Kudo. .
A final word. I was still having problems with partial open even when the drawing was created by the basic version of AutoCAD that came with IDSP. Autodesk support traced the problem to the fact that the Civil 3D Object Enabler is installed during the installation of IDSP. The only way to create a drawing in base AutoCAD from IDSP is to turn DEMANDLOAD off. Then create a new drawing.
Allen
Geesh，你会认为有人可能已经解决了这个问题。哈哈。但你是对的...我只需要使用基本AutoCAD来使命令正常工作。 没错。让我们在适当的地方留下一些东西，这些东西可能会严重破坏Civil3D文件中的数据。当然可以。有道理。然后用户可以抱怨这是怎么搞砸的。或者，用户可以试图理解，做事情是有原因的，而不是为了让他们烦恼。
页:
[1]