td88 发表于 2022-7-8 11:38:52

no grid?

I've set a grid size (96") and toggled the grid button on the bottom of screen and nothing shows up. When I toggle F7, I see the grid off/on reading in the command line but, nothing shows up on screen. What am I missing?

Lee Mac 发表于 2022-7-8 11:52:44

Are Limits set to the necessary coordinates?Is adaptive set to on for the grid?(I think that is the right name, I don't have Acad available right now, moving to 2010, or trying to anyway.

td88 发表于 2022-7-8 11:59:45

adaptive grid was my first thought but I think it came in on 2008. I am certain it wasn't on 2006. I did forget about limits though.

Lee Mac 发表于 2022-7-8 12:12:34

Try ZOOM > EXTENTS and then try the grid.

Lee Mac 发表于 2022-7-8 12:26:56

And then try ZOOM> ALL, and see if that helps:?

rkent 发表于 2022-7-8 12:38:53

Attach the file here.Don't need any geometry.
Lets put this one to rest.

dbroada 发表于 2022-7-8 12:44:28

Something must be toggled off, since I haven't been notified of the continuing replies to my thread. I've just come back to say, limits was the issue. I hadn't set limits and when I did, all was remedied. I guess the grid button won't toggle, when limits is not set. Thanks for all of your thoughts.
 
I'm not familiar with adaptive and, if it's a moot point with 2006, no need to reply but, if adaptive is available with 2006LT, I'd be interested in knowing what it is.
 
Thanks,
 
Tim "td88"
页: [1]
查看完整版本: no grid?