Autocad LT文字
如何让Autocad LT将文本识别为形状？我用这个程序试着用激光切割钢材，除非我把每个字母都单独画出来，否则我无法切割字母。任何帮助/提示都将不胜感激！
猪圈
出来 在express tools（如果已安装）的text（文本）下，选择Explode text（分解文本），这将为您完成这项工作。 如果LT具有Wmfout，请尝试导出文本，然后使用Wmfin导入，然后分解块。我想这会把文章分成几行。
不幸的是，ACAD LT没有express工具。 对不起，我对这个很陌生，什么是wmfout和wmfin？将文件导出到哪里？我也没有看到导入命令。
我非常感谢你的耐心和帮助！
猪圈
出来 WMF是一个Windows图元文件。可以在命令行中输入命令WMFOUT和WMFIN。至于到哪里去救他们，这取决于你。由于这是一个快速进出，你可能想保存到你的桌面或我的文件文件夹。只要确保完成后删除它们，以保持整洁。有关这些命令的详细信息，请在AutoCAD帮助文件中搜索粗体术语。一定要检查“概念”和“过程”选项卡。 我试过了，谢谢！然而，在被阻止的文本上似乎只有一个“节点”。因此，文本仍然不可用，我认为。。。。对不起，我的无知，我自学了AutoCad，因此我在学习。
猪圈
出来
1) Setup the text style to use an width other than exactly 1. It can be
.9999 or 1.000001 or etc.
2) Create the text or use property painter to 'paint' the new info to
existing text
3) Some where in the drawing, create a line that will be used for
reference later
4) At the command prompt, type WMFOUT
5) Select the text and the reference line (real easy if you have the text
on a separate layer)
6) Erase (or freeze) the 'real' text but keep the reference line
7) At the command prompt, type WMFIN & select the wmf file you created
Notice the wmf doesn't come in at the same scale - the reason for the
reference line
9) After selecting the base point, use the default scale & rotation
10) Now, move the block made by importing the WMF so one endpoint of the
wmf's ref line matches up with the corresponding endpoint of the original
ref line
11) At the command prompt, type SCALE and select the wmf block
12) For the base point, select the endpoint you used to match up ref lines
with - the common endpoint
13) At the command prompt, type R for reference
14) Pick the 'common' endpoint
15) Pick the other endpoint of the wmf's ref line
16) Lastly pick the other endpoint of the original ref line
17) Now you can explode the block and the text should be lines
If you're using True Type fonts, you'll get lots of little lines. To clean
it up easily do this:
18) After the explode, do a Change and select objects = previous
19) Put the objects on a layer by themselves for easy removal
20) Draw a rectangle around the text
21) Use the Boundary command and pick a point between the rectangle and the
text
22) Freeze or lock every layer but the layer the text is on & erase it
23) Change the boundary you created to that layer for easy removal later
24) Use the boundary command again and pick "inside" the outline of the
text
25) Freeze or lock every layer but the layer the first boundary is on &
erase it
You now have the text in a outline and can solid hatch it for a fill.
猪圈
出来 使用Wmfin导入时，实体将作为块输入。分解块（就像我之前建议的那样）
页:
[1]