wimal 发表于 2022-7-8 17:37:51

Floor & ceiling

When I try to create ceiling or floor after selecting walls the command
does not exit.It always requesting to select a wall.

RobDraw 发表于 2022-7-8 17:57:05

That is right.
 
If you are having trouble exiting the command, I would suggest you watch a couple tutorialS to get you rolling but you will probably need some formal training. Revit is not easy.

tzframpton 发表于 2022-7-8 18:06:58

Steve Stafford explains this subtle Revit quirk back in 2009: http://revitoped.blogspot.com/2009/10/four-ways-to-stop-waitpause.html
 
Hope this helps.
 
-TZ

wimal 发表于 2022-7-8 18:14:18

Yes Stilling I am learning. The ceiling problem solved. The problem was I have not selected correct ceiling type & correct offset distance from the floor.
Now I am trying to draw floors. Thanks for your advice.

RobDraw 发表于 2022-7-8 18:29:01

Then, I totally did not understand your first post.

tzframpton 发表于 2022-7-8 18:39:31

Apparently I didn't either!! That makes two of us.  
Glad he got it sorted out.
页: [1]
查看完整版本: Floor & ceiling