Doughs 发表于 2022-7-8 10:54:43

Lineweights all at 0.7mm

Drawing in model space all the lineweights when I "list" are at 0.7mm:
when i check Lineweight settings they are set to default which is 0.25mm: The drawings are then plotting to the 0.7mm lineweight which is obviously too thick: I've tried changing lineweights in "Layers"and Lineweight Settings and different plotting settings but to no avail:
How do i get back to 0.25mm default or equivalent to allow me to achieve proper lineweight plots...
help--it's driving me over the edge
thanks
Doug
(up until a few days ago all was ok--I have inadvertantly changes settings or similar somewhere!!)

NBC 发表于 2022-7-8 11:19:03

can you post here what you get when you list something in model space ?

Doughs 发表于 2022-7-8 11:31:17

"List" response ref lineweights
 
Select objects:
                  LINE      Layer: "WALLS"
                            Space: Model space
                   LineWeight: 0.70 mm
Linetype scaling =400.0000
                   Handle = 338e8
            from point, X=25582.4382Y=11052.8664Z=   0.0000
                to point, X=25582.4382Y=19940.9226Z=   0.0000
          Length =8888.0562,Angle in XY Plane =   90
                  Delta X =   0.0000, Delta Y = 8888.0562, Delta Z =   0.0000

NBC 发表于 2022-7-8 11:49:57

Ok thanks for the prompt reply.
 
At the commandline, type QSELECT
In the box that appears, select Multiple, then Lineweight, then 0.70mm in the Value. Press OK.
Open the Properties Palette, and using the Lineweight dropdown, scroll to the desired Lineweight setting.

Doughs 发表于 2022-7-8 11:57:38

thanks NBC..
got plots that are legible now..
(blocks seemed to be a bit of an issue--had to explode them)
thanks again
Doug
页: [1]
查看完整版本: Lineweights all at 0.7mm