Lineweights all at 0.7mm

Doughs · 发表于 2022-7-8 10:54:43

Drawing in model space all the lineweights when I "list" are at 0.7mm:
when i check Lineweight settings they are set to default which is 0.25mm: The drawings are then plotting to the 0.7mm lineweight which is obviously too thick: I've tried changing lineweights in "Layers" and Lineweight Settings and different plotting settings but to no avail:
How do i get back to 0.25mm default or equivalent to allow me to achieve proper lineweight plots...
help--it's driving me over the edge
thanks
Doug
(up until a few days ago all was ok--I have inadvertantly changes settings or similar somewhere!!)

NBC · 发表于 2022-7-8 11:19:03

can you post here what you get when you list something in model space ?

Doughs · 发表于 2022-7-8 11:31:17

"List" response ref lineweights

Select objects:
               LINE    Layer: "WALLS"
                        Space: Model space
               LineWeight: 0.70 mm
Linetype scaling =  400.0000
               Handle = 338e8
            from point, X=25582.4382  Y=11052.8664  Z= 0.0000
            to point, X=25582.4382  Y=19940.9226  Z= 0.0000
      Length =8888.0562,  Angle in XY Plane =    90
               Delta X = 0.0000, Delta Y = 8888.0562, Delta Z = 0.0000

NBC · 发表于 2022-7-8 11:49:57

Ok thanks for the prompt reply.

At the commandline, type QSELECT
In the box that appears, select Multiple, then Lineweight, then 0.70mm in the Value. Press OK.
Open the Properties Palette, and using the Lineweight dropdown, scroll to the desired Lineweight setting.

Doughs · 发表于 2022-7-8 11:57:38

thanks NBC..
got plots that are legible now..
(blocks seemed to be a bit of an issue--had to explode them)
thanks again
Doug

[综合讨论] Lineweights all at 0.7mm

发表回复

精选推荐