hussin 发表于 2011-4-10 14:49:54

請幫忙 level head

Hi all,
I'm thinking of making a level head that gives both Structural & Finish Floor Levels. The Elevation value will be the SFL & for the FFL maybe a formula eg SFL + Finish where the user can fill in the value for the finish. Is it possible to make such a thing?


二層   +5.00
         (+4.50)


Hussin

ping 发表于 2011-4-10 17:41:51

Hi hussin,

you can make a level head which gives both structural and finish levels, but it is hard to use the formula to calculate the FFL. you have to use a shared text parameter and import it as a project parameter which will be used in the Level category, and thus you can input the text value to express the FFL. in this way, the representation will look like what you desired, but generally it is not a "BIM" solution. anyway, the procedure I think is:

edit the level head in family editor, add a shared parameter named "FFL" in the label.


so as the label will look like:


load the annotation into project, and overwrite the existing one.
add the shared parameter "FFL" as project parameter and implement it in the "Level" category.



and you will find the "FFL" in the element properties, input the value you want such as "+5000", and the level will become:


you can also change the parameter units representation (e.g. units,rounding, prefix, suffix) to make them more like what you want :)

Stone 发表于 2011-4-10 21:43:30

Ping大侠的英文好强，回答的好仔细，

心灵的自由 发表于 2011-4-11 10:21:52

我过来学E文的 我过来学E文的 我过来学E文的

hussin 发表于 2011-4-11 23:53:43

PING
Thank you your help, i will understand your procedure and i have a result therefore ishappy.
Another , default level head is FFL in elevation view or not?so project create from FFL?

ping 发表于 2011-4-12 12:48:44

hi hussin, nice to know you make it.
Personally thinking, the default level head (i.e. the parameter "Elevation") could be regarded either as "SFL" or "FFL" based on different roles. such as for architecture it could be "FFL" and for structure engineer it will be "SFL".

ping 发表于 2011-4-12 12:48:45

hi hussin, nice to know you make it.
Personally thinking, the default level head (i.e. the parameter "Elevation") could be regarded either as "SFL" or "FFL" based on different roles. such as for architecture it could be "FFL" and for structure engineer it will be "SFL".

hussin 发表于 2011-4-14 00:12:07

Ping Sir
Thank you your teaching, i know a key that is architecture/structure. i have some problem again , further i ask you.
页: [1]
查看完整版本: 請幫忙 level head