macro mid to point doesn'

marmo · 发表于 2022-7-5 23:24:20

Hi to all,

I often use this (nameless) macro in Autocad 2010 while another command is open.
For example I digit "line" on promp, then I choose the first point, and then to select the second point which is a midpoint between other two, I digit:

'' + space (more comfortable for me than using shift and right click)

But I found that in 2014 atucad this macro does not work when another command is open.
Does anyone know the reason? Is there any system variable to be set?

The macro is:

(defun c: ()
(command "_M2P")
)

Thanks for any help

GP_ · 发表于 2022-7-5 23:30:07

Hi Marco,
why not use an unused function key?
I've assigned F5, very fast.

guran · 发表于 2022-7-5 23:31:38

Try this:
'_M2P

marmo · 发表于 2022-7-5 23:34:45

Hi ,
yes, F5 is an available option, but for a long time I used ''+space,which worked well on autocad 2007 and 2010, and I do not understand why on autocad 2014 will not work anymore.
Then to assign F5 I should create a new command passing through the CUI and is something that I prefer to avoid, because I often use the computers of colleagues and my customizations (for me easily reversible) are limited to lisp files I use frequently and aliases of PGP.
I do not want to change my habits because of a simple matter, perhaps a system variable set differently ...
Thanks

marmo · 发表于 2022-7-5 23:39:27

Hi guran,

you mean that i've to chenge the macro?
like this:

(defun c: ()
(command "'_M2P")
)

guran · 发表于 2022-7-5 23:40:59

Yes, exactly!

marmo · 发表于 2022-7-5 23:45:31

In Autocad 2010 '_M2P give me error.
I'll try tomorrow on Autocad 2014, I'll see if it works

guran · 发表于 2022-7-5 23:48:11

This is from AutoCad 2014 help:
"To use a command transparently, enter an apostrophe (') before entering the command at any prompt."

ReMark · 发表于 2022-7-5 23:51:41

M2P is not a command. It is a command modifier. Why would you need to use an apostrophe?

guran · 发表于 2022-7-5 23:54:19

You're right, ReMark, I just read marmo's macro - "(command "_M2P")". That should not be a command.

[编程交流] macro mid to point doesn'

发表回复

精选推荐