Autocad 13 for Mac - lisp rout

Cesarman · 发表于 2022-7-6 06:30:15

I'm new to this forum, and I'm glad I found it. I am also new at lisp, although I have programming experience with other languages. My question is how come a lisp routine won't work on my mac?. First thing that I wonder is the c: right after the defun.

Can someone point me to some good article on this?

Thanks!

ReMark · 发表于 2022-7-6 06:40:20

There are many features that are missing. See for yourself....

http://www.blog.cadnauseam.com/2012/07/30/autocad-2013-for-mac-the-holes-live-on/

You have my sincere condolences.

troggarf · 发表于 2022-7-6 06:43:28

I dont have an article to reference yet, but I know that ACAD for MAC can run pure AutoLISP but not Visual LISP like "VL" "VLA" "VLAX"...

ReMark · 发表于 2022-7-6 06:52:39

From JTB World...

Most AutoLISP will work unless it includes Windows calls (using .NET) or uses DCL dialogs
Most ARX applications will work unless it includes MFC or .NET calls

Cesarman · 发表于 2022-7-6 06:54:44

Well, thanks I will start reading

Cesarman · 发表于 2022-7-6 07:02:49

Thanks! I appreciate any sort of advice!

ReMark · 发表于 2022-7-6 07:07:54

You should change your profile to read AutoCAD for Mac 2013 so we'll know you aren't playing with a full deck.

Luke....come over to the Dark side.

neophoible · 发表于 2022-7-6 07:16:27

Welcome to the forum. There may not be many if any Mac users here, but there still may be some help with routines. They may have to be "dumbed down" to work, but in many cases that may not be too hard, or there may already be an alternative version that would work. To start out, you will probably want to just post whatever routine won't work and learn from there. Lots of folks here are happy to explain things.
The C: right after the defun means you can type the name (minus the "C:") right on the command line as though it is an AutoCAD command, that is, with no parentheses.

neophoible · 发表于 2022-7-6 07:18:31

Mine, too, especially, if you were "forced" into it.
Mentioned in ReMark's link.

Yes, good advice. And you might mention it in your posts, just in case folks miss it otherwise.
This may be the best advice!

Cesarman · 发表于 2022-7-6 07:29:59

I will follow your recommendation, thanks a lot

[编程交流] Autocad 13 for Mac - lisp rout

发表回复

精选推荐