Move objects to match x (y,z)

Randolph · 发表于 2022-7-6 12:15:07

I'm also looking for a procedure to move an object parallel to an axis and match a start point with the x,y, or z-coordinate af another point while keeping the other coordinates.

copy

 defun c: txp (translate in x-direction to a certain point), typ, tzpselect objectsselect point 1 (x1,y1,z1)select point 2 (x2)move objects (x1,y1,z1) ([b]x2[/b],y1,z1)

Alan ... please ... ?

alanjt · 发表于 2022-7-6 12:19:58

LoL
I'm not sure I understand what you are asking. Sounds like something that can be solved with point filters. Shouldn't be too terribly difficult. I don't mind helping, but I'm not sure I understand what you want.

alanjt · 发表于 2022-7-6 12:24:53

Is this what you are shooting for?

You could also achieve this by turning orthomode on.

Might as well post this. I know it's not what you were looking for, but someone might want it.

copy

(defun c:MXY (/ #SS #Pnt #Choice) (and (setq #SS (ssget "_:L"))      (setq #Pnt (getpoint "\nSpecity base point: "))      (not (initget 0 "X Y"))      (setq #Choice (getkword "\nAxis filter [X/Y]: "))      (command "_.move" #SS "" "_non" #Pnt (strcat "." #Choice) "_non" #Pnt) ) ;_ and (princ)) ;_ defun

Randolph · 发表于 2022-7-6 12:29:07

Edit: Bad example.

Randolph · 发表于 2022-7-6 12:31:31

OK, a better example. And a real one.

In top view, I've positioned a table in my house model.
As I change to ISO-view, I find that the table hovers somewhere above the floor.
No I would like to enter "tzp", click on any foot of a table leg and then on any corner of the floor.
The table would drop to the floor without changing its position in the ground plan.

I hope that does it. I admit that above descriptions were a bit weird. Thanks for your understanding.

alanjt · 发表于 2022-7-6 12:34:39

1. Will it always be a block?
2. Single or multiple objects?

Randolph · 发表于 2022-7-6 12:39:30

Mostly 3D Solids, but also 2D objects. Multiple would be better, as the "table" might consist of several solids.

alanjt · 发表于 2022-7-6 12:41:48

So it's no different than selecting an object, picking a point, using .XY filter, then picking another point to get the Z value?

copy

Command: mMOVESelect objects: Specify opposite corner: 1 foundSelect objects:Specify base point or [Displacement] : _endp of Specify second point or : .XY of _endp of (need Z): _endp of

alanjt · 发表于 2022-7-6 12:46:23

This?

........

Randolph · 发表于 2022-7-6 12:49:19

"So it's no different than selecting an object, picking a point, using .XY filter, then picking another point to get the Z value?"

Yeah, you got it, but in 1 command and also for the other axis (txp, typ, tzp). As I wrote in the first posting:

move objects from point (x1,y1,z1) to point (x1, y1, z2).

It's no more complicated.

[编程交流] Move objects to match x (y,z)

发表回复

精选推荐