|
|
贴一篇从前的帖子，先容RST模子通过Etabs交互计划时模子导入导出的题目及办理对策，通过本文，各位看官应该能完成RST模子的和分析软件的一条龙工作，并没有太多贫苦。
在发表之前声明在先，许多人渴望模子导出去后在分析模子里还要改设置，感觉就这也不可那也不可。乃至发展为不乐意打仗RST， 这里我仅做同一阐明。
RST是用来准确建模、统计、管理及自动化图纸、同步等工具，而布局分析及布局分析软件思量的是布局模子简化，荷载转达路径，及规范条文。因此模子查抄是制止不了的，即便是PKPM当模子导入到SatWe等反面的模块中时也要举行模子查抄及调解。而随着软件接口的进步，这种查抄的工作量会越来越少，本文仅以RST2008和Etabs 9.2.0的交互实例作以演示，目的在于抛砖引玉。
英语比力简朴各人直接看英文的吧。 有不明确的再说。
Software application: RST 2008 ,CSI Etabs 9.2.0, and CSIxRevit 2008.Usually Etabs export .exr file and Revit import the .exr file to generate the .rvt mode, shown below: Fig 1, Etabs export file for RevitIssue Description:If Revit project template does not have the corresponding component types mentioned in an .exr file, after the .exr is imported, the components defined in the Etabs model could not be generated correctly. RST will replace the element with the default type of the category that the component belongs to. Please refer to fig 2 and fig 3. Fig 2, Etabs classifies the beam sections with diverse colors (plan view).Fig 3, Revit generate the model with .exr file imported (plan view), all beams are replaced with 400x800. An issue.log will be created after the file is generated, shown as fig 4.Fig 4, an issue log file is created to show the failed items. Suggestions to avoid the failures- step by step1.
To summarize the element types or to identify
the on-going element issues,There are two methods to summarize the element types; Option 1 is to check the element types in Etabs mode before the wrong mode is generated with RST. As fig 2 indicates, Etabs could classify element-section-types with diverse color shown, here is the setting, Fig 5, view setting in Etabs to classify the element type by colorOpen each plan view, check and summarize the element types by color, shown below, Fig 6, check the element type via right clicking the elements Note: Please check the beam in plan levels, and check the columns in Elevation views. Option 2 is to summarize the issued element types via checking the issue log (.txt) file, please refer to fig 4. That is to say, firstly we generate the .rvt file to generate the issue.txt, and then we summarize the issued element types. 2.
Pre-set the element types in Revit project (.rvt) file before the .exr file is imported and Revit mode is generated.Based upon the summary created in step 1, all element types should be pre-set in Revit Project (.rvt) or template (.rte) file, to ensure the mode being generated correctly thereafter, shown as Fig 7.Fig 7, pre-set new types in Revit project (.rvt) or template (.rte) file according to the summary Tip: if the project contains many element types, one can create the family catalog (.txt) file to save time creating the types. Import the .exr file to generate the Revit model, the final .rvt mode should be created base on step 2 |
|
置顶卡
