OPEN / SAVE / NEW DIALOG BOX M

JD Mather · 发表于 2022-7-7 14:27:20

Also check cmddia whenever filedia is inadvertently changed as it is often not reset as well.

DANIEL · 发表于 2022-7-7 14:30:18

that makes sense, the ol i canceled a command and lost all my osnap settings thing.

Larrytru · 发表于 2022-7-7 14:35:09

Thank You. That did the trick. I couldn't find the command to turn it on anywhere.

barefootbob · 发表于 2022-7-7 14:38:26

Awesome, thanks for the tips.

jaminn1 · 发表于 2022-7-7 14:40:37

that was a relief bless you dear

CADnoobi · 发表于 2022-7-7 14:43:04

Hello,

AutoCAD MEP 2010. I have set attdia,filedia and cmddia all to 1. My dialogue boxes will still not come up when I type on the command line. For example, I type "xref" and I get prompts in the command line versus the dialogue box popping up. The same for "layer" and "linetype". Oh and my ~ response to the first prompt does not bring up the dialogue box either.

I saw in ACAD help that this may be related to AutoLISP. However, I know nothing about AutoLISP. Any help would be greatly appreciated.

rkent · 发表于 2022-7-7 14:47:20

Close AutoCAD, then restart with a different profile or new profile. Does it work now?

Start AutoCAD with a new profile (copy the shortcut on the desktop, right click on shortcut, go to Shortcut tab, in the Target line after the first statement in quotes you may have a /p profile_name, over write that if it is there with /p newprofile (pick any name that doesn't already exist in your profile folder), and if you don't have a /p profile_name then simply add the /p newprofile to that line. Pick ok, then double click on the icon, AutoCAD will start with the new clean profile, open a drawing and see if you have the same trouble.

CADnoobi · 发表于 2022-7-7 14:50:00

Ok I was able to do that, it made a new profile. I made sure all of the variables were set to 1. The problem is still there.

SLW210 · 发表于 2022-7-7 14:54:18

Do you use more than one monitor?

CADnoobi · 发表于 2022-7-7 14:55:51

Yes, I have two monitors. However, the prompts continue to come up in the command line [?/Bind/Detach/Path/Unload/Reload/Overlay/Attach] so I don't think that I have a missing window, but maybe.

[综合讨论] OPEN / SAVE / NEW DIALOG BOX M

发表回复

精选推荐