Title Block and model space -

raley123 · 发表于 2022-7-7 15:39:37

Hi, Can anyone help?

I have set up a template to A3 - I have amended the page setup to A3 and I have drawn my title block and saved it as a template.

I am now trying to insert the template onto a drawing I have done. I insert the template into a new layout and then do MVIEW to insert my drawing from model space. The problem I am now encountering is that my drawing in MVIEW will no scale correctly. It should scale as 1:100 at A3 as the drawing does before I insert my title block, but when I insert it, I then have to scale at 1:500

Any ideas where I am going wrong here?

Thanks

Rachel

ReMark · 发表于 2022-7-7 15:55:38

By any chance did you measure your template when you brought it into the new layout? If so what dimensions did you get?

raley123 · 发表于 2022-7-7 16:04:41

I have just measured the template now - it is 10x15 mm on the template drawing!

I find it odd though as the page setup for that template is A3 and it fills the whole page on the template?

ReMark · 发表于 2022-7-7 16:17:53

1 unit in AutoCAD can represent any dimension you want. Perhaps you "thought" you were drawing at 1 unit = 1mm but apparently you weren't.

Are you a student by any chance?

raley123 · 发表于 2022-7-7 16:26:47

yes, I am a beginner

ReMark · 发表于 2022-7-7 16:37:25

Well if you'd like I can point you to a website where you can download pre-drawn metric templates (A0, A1, A2 and A3). I know they are correctly done because they were created by a well respected and knowledgeable member of this forum by the name of NukeCad.

Well just in case you are interested....

http://www.cadeverything.com/help/showthread.php/4380-METRIC-DRAWING-TEMPLATES

I opened one of the templates. It is very well done.

rkent · 发表于 2022-7-7 16:40:58

Your A3 border should measure 420x297 mm.

[综合讨论] Title Block and model space -

发表回复

精选推荐