Please help ! (cross section)

Angel24 · 发表于 2022-7-8 10:49:10

Hello everyone,
My name is Angel and I am a Cad student. I founded it very interesting and I am very eager to learn. I am currently doing a proyect and I have been told to do a cross section of a floorplan. I do not know what a cross section is so I am stock or what to do...
Can anyone help me ? I'm using AutoCad 2010

GE13579 · 发表于 2022-7-8 11:06:22

A cross section is a view as if you slice something in half, so you would be looking at ground level as opposed to a birds eye view as is the plan.

ReMark · 发表于 2022-7-8 11:17:47

You must have a textbook for this course you're taking. It doesn't have an example of a cross-section? Do you need references? You're aware that the view that you sketch up will be dependent upon where your section line falls on the floor plan right?

Angel24 · 发表于 2022-7-8 11:23:40

Thank you so much guys, your answers lead me in the right direction and I now have my answers. Thanks again !

nocturne00 · 发表于 2022-7-8 11:30:40

Note:
Cross Section- Sectional View along the short side of a Floor Plan, as opposed to Longitudinal section w/c is taken from the longer side of the FP.
as Remark has stated, This is all standard in Drafting textbooks

ReMark · 发表于 2022-7-8 11:39:39

Angel: I see you're here in the U.S. Beg, borrow or buy a copy of either/or both of the following:

Architectural Graphic Standards by Ramsey & Sleeper.

Architectural Drafting and Design by Jefferis & Madden.

nicolas · 发表于 2022-7-8 11:52:00

Hi,
There are actually two cross-section some way along the longitudinal or lateral sides of the building that you can call A-A or BB respectively. When you slice along the floor you will have to represent the floor, columns, beams and slab with some hatching materials say solid (for simplicity) or concrete (with scale set up to 600 approx) and the block wall a different but standard hatch (which also need scale set up to 600 to 800 approx) shading. You will also have an interior view of the building. You don't necessarily need to input the furniture but you may have to include beam lines, interior column/wall edges and windows boundaries, separation and glazing.
Hope this help.
Nicolas.

[综合讨论] Please help ! (cross section)

发表回复

精选推荐