Trying to create a chamfer.

Timms_KHP · 发表于 2022-7-8 21:52:02

Hi all,

i'm trying to create a chamfer between a concrete slab and concrete upstand/parapet wall.

Its above the stair so the chamfer will create the min 2.0m headroom clearance, (required in the uk). how do i do this?

picture attached, hopefully.

登录/注册后可看大图

[/img]

qabulin · 发表于 2022-7-8 22:48:16

First, determine what the slanted section BEST represents: an up-slanted slab, or a down-slanted wall.

Once you have determined this, you can the put in a separate slanted wall or slab and simply use Join to blend things together
There are various ways to get a slanted component: slabs can have the edges manipulated and sloped, you could pick a slanted line or plane as a guide line and use it to place the wall... etc...

If you're in Revit 2010, I know you can set a split line and then use the manipulative options for slabs to move edges around and use the split line as a pivot point.

Let me know if you need more help, a vid or pictures.

Good luck!

Timms_KHP · 发表于 2022-7-8 23:18:48

Thanks, i will give this a go, im in revit structure 09 and haven't used or know many of the tools.

[综合讨论] Trying to create a chamfer.

发表回复

精选推荐